Welcome to Changzhou Tenjan Steel Tube Co., Ltd
Sunny@tenjan.com
1035 Seamless Steel Tubes represent medium carbon steel tubular products with carbon content controlled between 0.32%-0.38%, delivering optimal balance between strength and ductility. These medium carbon steel tubes are manufactured according to ASTM A519 and ASTM A106 standards, offering superior mechanical properties compared to low-carbon steels like 1018 while maintaining better processability than high-carbon steels such as 1045.
Material Specifications & Standards Compliance
As part of the 10xx series carbon steel classification, 1035 seamless tubes correspond to international material standards including:
China: 35# steel (GB/T 699)
Germany: C35 (DIN 17200)
Japan: S35C (JIS G4051)
The controlled manganese content of 0.60%-0.90% and minimal impurity elements ensure consistent performance across various manufacturing processes and application environments.
Mechanical Properties & Performance Characteristics
These medium carbon seamless tubes demonstrate excellent mechanical properties with tensile strength ranging 515-655MPa and yield strength approximately 310MPa. In annealed condition, the elongation reaches 18%-22%, providing reliable formability for subsequent manufacturing operations.
The balanced material composition enables superior processing characteristics including excellent machinability, drilling performance, and stable weldability with proper preheating treatment. Additional quenching and tempering processes can further enhance hardness and wear resistance for applications requiring extended service life.
Applications & Industry Solutions
1035 seamless tubes serve multiple industrial sectors with particular strength in:
Mechanical Manufacturing
• Shafts, gears, and bolts
• Connecting rods and machine tool structural components
• Precision-engineered parts requiring strength and processability
Automotive Industry
• Steering system components
• Suspension parts and transmission accessories
• Automotive structural elements demanding reliability
Hydraulic & Pneumatic Systems
• Medium-pressure hydraulic cylinders
• Piston rods and pipeline connectors
• Fluid system components with pressure requirements
General Engineering
• Structural supports and fixture elements
• Medium-load mechanical parts
• Industrial applications requiring balanced performance
Customization & Delivery Conditions
Tenjan provides flexible delivery conditions to match specific application requirements:
◆ Annealed condition (GBK) for enhanced processability
◆ Stress-relieved condition (BKS) for dimensional stability
◆Quenched & tempered condition (Q&T) for strength enhancement
Our technical team offers comprehensive support for material selection and condition specification based on your operational requirements and manufacturing processes. With extensive experience in carbon steel tube production, we ensure consistent quality and reliable performance for your critical applications.
Custom Sizes OD10-108mm - ASTM/EN/DIN/JIS/GOST Certified - Small-Batch Friendly
| Parameter | Key Features |
| Outer Diameter | 10-108mm (0.39"-4.25") • Fully customizable |
| Wall Thickness | 1-20mm (0.039"-0.79") • ±0.1mm precision tolerance |
| Material | Carbon Steel • Alloy Steel • Special grades available |
| Process | Cold Drawn & Cold Rolled for superior finish |
| Industry | Typical Grades We Supply |
| GB | DT4,Y15,10#,20#,20G,Q235,25Mn,35#,45#,55# |
| ASTM | 1215,1008,1010,1020,A105,A106 Gr.B,A36,1026,1035,1045,1055,SA179,SA192 |
| EN | DC01,11SMn30,P235TR1,P195GH,P265TR2,E235 |
| DIN | DC01,11SMn30,CK10,C10,ST35.8,C20,CK20, ST45.8,St37,S235JR,C26D,CK35,CK45,CK55 |
| JIS | SUM22,S10C,STKM11A,STPT370,STB35,S20C,STKM12, STKM13,STPT410,STB42,SS400,S35C,S45C,S55C |
| GOST | 08КП,10,20,Ст3сп,25,35,45,55 |
| Other Speical Grades can be customized | |
| Standard | Key Applications Parts | Relevant Standards | Our Advantages |
| Automotive and Motorcycle Component | Shock Absorbers,Steering Systems,Thrust Rods | EN 10305-1,JIS G3445, DIN 2391,ASTM A519 | High fatigue strength,High yield strength,lightweight,precision dimensions (±0.1mm) |
| Engineering and Mining Support | Anchor Bolts,Support Pipes,Hydraulic Props | ASTM A519,DIN 2391, JIS G3441,EN 10297-1, ISO 10799 | High Strength &Yield Strength&High Elongation Customization Service - Special steel grades,dimensions and surface treatments available according to project requirements |
| Construction Machinery | Drive shaft sleeves ,Gearbox Guide Tubes,Crane Boom Guide Tubes,Excavator Arm Tubes,Loader Frame Tubes, Arctic Low-Temperature Tubes | ASTM A519,DIN 2391, JIS G3445,EN 10210-1, GOST 8733,ASTM A106, ISO 9329 | ID/OD tolerances of ±0.05mm.Wall thickness uniformity straightness ≤0.5mm/m |
| Fluid Transport Systems | Oil/Gas pipelines,chemical systems,Power/Energy | ASTM A106 Gr.B, EN 10216-2,GOST 8734 | Eddy Current + Ultrasonic Testing,Hydrostatic Testing |
| High-Pressure Boilers | Superheaters,Steam lines,Reheaters,Economizers) | ASTM A192,DIN 17175, EN 10216, JIS G3461/G3462 | Enhanced material density through cold-drawing/rolling ensures long-term stability Full Compliance with Int'l Standards,Superior Creep & Fatigue Resistance |
| Geological Drilling | Drill Pipe,Tubing | ASTM A519,API 5DP, EN 10208-2 | High Strength & Wear Resistance precision Dimensions Impact & Fatigue Resistance |
| Agricultural Machinery | Hydraulic cylinders,drive shafts,Lift arms, steering housings,Boom frames | ASTM A519,EN 10210-1, DIN 2391,GOST 8733, JIS G3445 | Material Advantages:High Strength & Lightweight,Precision Cold-Drawing Technology,Dimensional accuracy ±0.05mm |
| Petroleum Cracking Units | Reformer Tubes,Heat Exchanger Tubes,Reactor Feed Pipes,Transfer Lines,Quench Oil Pipes | ASTM A335,ASTM A213, EN 10216-2 | Optimized Material Purity,Precision Dimensional Control,Customized Solutions |
Tailored Features · Designed Exclusively for Your Needs
Breakthrough in Pure Iron 1215 Steel Tube Mass Production – 30% Cost Saved vs. Solid Bar Machining Industry-First Innovation:
We’ve achieved mass production of precision soft iron carbon tubes and 1215 free-cutting steel tubes, eliminating costly machining steps for OEMs.
Key Benefits:
✔ 30% Lower Total Cost– Replace solid round bars (no boring needed)
✔ Faster Production – Reduced machining & assembly time
✔ Less Waste – Precision hollow tubes optimize material use
Applications: Automotive, Hydraulics, Fasteners, and Machined Components.
Cold Drawing + Cold Rolling Dual-Process Technology – Affordable Small-Diameter Seamless Steel TubesInnovative Production for Precision Tubes:
Our self-developed piercing mill combines cold drawing & cold rolling, optimizing efficiency for small-diameter seamless steel tubes (OD<50mm).
Key Advantages:
✔ Lower Cost – Dual-process reduces material waste & energy use
✔ Tighter Tolerances– Improved surface finish & dimensional accuracy
✔ Faster Lead Time– Streamlined production vs. traditional methods
Applications: Automotive, Hydraulics,Oil & Gas/Petrochemical，High-Pressure Boilers，and Fluid Transport Systems.
100+ Carbon Steel Grades – Customize for 20% Cost Savings (Machining,Construction More） Premium Steel Supply Chain:
Partnering with Baosteel, Xingcheng Shagang, we offer 100+ fully customizable carbon steel grades with guaranteed quality and stable supply.
Customization Advantages:
✔ Chemical Composition– Adjust C, Mn, Si, etc. for specific applications
✔ Mechanical Properties– Yield/Tensile strength optimization
✔ Rigorous QC– Full inspection (UT, hardness testing, dimensional checks)
✔ 20% Procurement Savings– Bulk pricing process efficiency
Key Industries Served: Machining Automotive，Construction Infrastructure, Oil Gas, Heavy Equipment
High-Precision Tube Straightening Technology - ≤0.5mm/m Tolerance for 30% Faster MachiningIndustry-Leading Straightening Solutions:
Our proprietary system delivers carbon steel tubes with ≤0.5mm/m straightness-4X more precise than industry standards, specifically engineered for high-speed machining applications.
Key Advantages:
✔ 30% Production Boost- Perfect straightness reduces lathe processing time
✔ Tool Life Extension- Minimizes cutting tool stress and wear
✔ Cost Efficiency- Lower maintenance and higher throughput
Technical Superiority:
In-House Developed Equipment- Customized for machining-grade precision
20+ Years Expertise- Master technicians ensure optimal results
Automated Quality Control- Consistent straightness verification
Ideal for:Hydraulic Cylinder Tubes, Automotive Shafts, Industrial Machinery, Oil Gas Equipment
Ultrasonic + Eddy Current Dual-Testing - 0.20mm Flaw Detection for Critical Steel Tubes Industry-Leading NDT Precision:
Our dual-technology inspection systemdelivers 0.20mm flaw detection accuracy- the gold standard for mission-critical tubing applications.
Dual-Testing Advantages:
✔ Ultrasonic Testing (UT)- Detects 0.20mm micro-cracks & inclusions
✔ Eddy Current (ET)- Pinpoints surface/subsurface defects
✔ Multi-Probe Array- 360° coverage (ID/OD/wall thickness)
Two-Layer Quality Assurance
Flaw Detection: Cracks/pores/inclusions ≤0.20mm
Dimensional Control: ±0.05mm tolerance verification
Critical Applications: Automotive Airbag Tubes,Fluid Transport Systems, Petrochemical High-Pressure Piping
Why settle for generic materials when we can align specifications directly to your application? By focusing on only what you need, we deliver superior cost efficiency without compromising quality—saving you time and resources.
Our surplus capacity acts as a safety net, eliminating risks of bottlenecks or missed deadlines—critical for projects with strict timelines.
• Advanced metalworking: Piercing, pickling, heat treatment & cold forming
• Precision verification: Dual NDT (Ultrasonic/Eddy Current) + material testing (Tensile/Chemical)
• 24/7 lab monitoring of 60+ parameters ensuring product consistency
IATF16949: Automotive-grade quality for precision parts.
TS (Pressure Pipe): Safety compliance for critical infrastructure (e.g., pipelines, boilers).
ISO9001: General excellence in process management.
Plus optional third-party validation (TÜV/SGS) for added credibility in regulated markets like aerospace, energy, or medical devices.
Home Product Capabilities Case Studies Blogs About Get a Quote
Shapes & Profiles Pipe & Tube Manufacturing Process Pipes & Tubes Material Standard Steel Pipes & Tube Rebar Couplers Cold Drawn Steel Profiles & Bars
Oil & Petrochemical Industry Automotive & Motorcycle Components Mechanical Engineering Components Mining Construction Support Structures High-Pressure Boiler System Construction Machinery Geological Drilling Agricultural Machinery Parts Industrial Fluid Transfer Systems
© 2024 Changzhou Tenjan Steel Tube Co., Ltd All rights reserved. Privacy StatementTerms-ConditionsSitemap
